Concrete beams
Beams are the main horizontal load-bearing elements of frame buildings and of structures such as bridges. They are primarily designed to carry bending and shear, sometimes in conjunction with limited torsion (twisting load).
Beams are the main horizontal load-bearing elements of frame buildings and of structures such as bridges. They are primarily designed to carry bending and shear, sometimes in conjunction with limited torsion (twisting load).
Columns are the main vertical load-bearing elements of many buildings. They are designed primarily to carry an axial load, usually in conjunction with a limited amount of bending. They may be cast in situ or be precast. In most cases the cross-sections are square or rectangular (to maintain the same geometry as the beams) although circular and other cross-sectional shapes are used.
A suspended concrete floor is a floor slab where its perimeter is, or at least two of its opposite edges are, supported on walls, beams or columns that carry its self weight and imposed loading. The floor spans between supports and will normally deflect under load to a dimension that is limited by the design used. The prestressing of a concrete floor slab can eliminate its usual deflection below support level. This is achieved either by pre-tensioning, where precast floor units are used, or by post tensioning with steel wire tendons incorporated in an in-situ concrete slab.
Ground-supported concrete floors are used in many types of building, ranging from simple houses through to schools, factories, and very large warehouses. As the floor type name implies, any loads imposed on the concrete floor are carried directly and fairly uniformly by the ground under the floor.