Concrete @ your Fingertips


Screeds general

Screeds are covered by BS 8204, Screeds, bases and in-situ floorings, (2004).

A screed is a layer of material laid in situ, directly onto a base, for one or more of the following purposes:
To obtain a defined level
To carry the final flooring
To provide a wearing surface.

Screeds may be:
Fully bonded to the base
Unbonded (i.e. not bonded to the base typically where a DPM is placed under the screed.)
Floating (used to enable installation of thermal or impact sound insulation).

The optimum thickness of a sand and cement bonded screed is 2540mm, an unbonded screed should have a minimum thickness of 50mm, whilst a floating screed should have a thickness greater than 65mm for lightly loaded floors and 75mm for more heavily loaded floors. A minimum thickness of 65mm is possible provided the thermal insulation boards are firm enough for the compaction of the screed.

There are proprietary screeds available that can be laid at thinner depths than conventional sand and cement screeds.

Further reading: PYE, PW and HARRISON, HW. Floors and Flooring, BRE, 2003.